8412001 Flow Sensor Accessories for Temperature and Humidity Measurement

8412001 Flow Sensor Accessories

Basic Information:

• Brand: Drager
• Model: 8412001
• Product Type: Possibly a gas filter, flow sensor, or battery component for anesthesia machines/ventilators (to be confirmed based on the equipment model)
• Applicable Equipment: Compatible with Drager series anesthesia machines (e.g., Fabius, Primus) or ventilators
• Purpose: May be used for gas filtration, flow monitoring, or equipment power supply

Product Features:

• Compatibility: Specifically designed for Drager equipment to avoid malfunctions due to interface mismatches;
• Safety: If it is a filter, it uses a hydrophobic membrane design to prevent liquid from entering the equipment; if it is a sensor, it has an anti-corrosion coating;
• Easy Maintenance: Supports plug-and-play, and some models can be automatically calibrated (e.g., filter replacement prompts, sensor zero-point calibration);
• Certifications: Complies with medical device standards such as CE and ISO 13485, and some models are FDA-certified.

Application Scenarios:

• Anesthesia machine maintenance: Used to replace aging filters or sensors to ensure gas monitoring accuracy;
• Emergency backup: Battery components can maintain equipment operation for a short time during power outages to ensure surgical safety;
• Equipment calibration: New sensors need to be calibrated with standard gases (e.g., 21% O₂) after installation.

Installation and Replacement:

• Installation Method:
  • Filter: Unscrew the equipment filter chamber and directly replace the old filter element;
  • Sensor: Disconnect the power supply, plug in and replace, and complete initialization through the equipment menu;
  • Battery: Disconnect the connection, install according to polarity, and charge for 4 hours when using for the first time.
• Replacement Cycle:
  • Filter: Replace every 6 months or after 500 hours of use;
  • Sensor: It is recommended to replace it every 1–2 years (depending on usage frequency and environment);
  • Battery: Replace when the battery life drops to 80% of the rated value.

Precautions:

1. Do not mix with non-original parts: Non-original accessories may cause equipment malfunctions or measurement deviations;
2. Storage requirements: Filters should be stored in a dry and dust-free environment, and sensors should avoid contact with corrosive gases;
3. Calibration requirements: After replacing the sensor, it must be calibrated with Drager original calibration gases (e.g., O₂, N₂O standard gases);
4. Waste disposal: Medical-grade consumables should be discarded according to the hospital's infectious waste disposal procedures.

8412001 Flow Sensor Accessories

Temperature and Humidity Measurement Sensor

8412001 Flow Sensor Accessories for Temperature and Humidity Measurement Images